| Aja MultiTransmitter module for connecting wired alarm to Aja and managing security via the app.rThe second life of a wired alarmAja MultiTransmitter replaces the old security control panel, providing connection of wired devices via radio communication to the Aja system. Universal compatiility and a user-friendly app make renovating a wired alarm a simple, step-y-step process. And system operation controlled y a hu guarantees staility, resistance to threats, and functionality improvement through automatic updates.rMore Aja featuresIR arriers, household gas, temperature, liquid level detectors, and other devices are ready to epand the Aja areas of use. Connect them to a hu via Aja MultiTransmitter and manage the comined security system in the Aja app.rData-rich alarmsWith MultiTransmitter, you can specify the type of alarm and a room for each wired device. This makes notifications more informative - you know not just what happened ut where. This information is displayed using push notification, SMS, and is also sent to the security company's monitoring station under an appropriate code. A total of five types of alarms are availale: intrusion, fire, medical assistance, panic utton, gas leak. rIntrusion confirmation in 9 secondsConnect MotionCam - a motion detector with a photo camera - to know for sure whether there are urglars in the place, or someone just did not disarm the alarm. The camera is activated only when the system is armed, and motion is detected. Contrary to video surveillance, the detector's photos are securely encrypted and transferred to the app in seconds, and only to those users who are granted viewing rights. rMade y professionals for professionalsWe made sure that the installation and setup process does not require any etra time or effort. Like other Aja devices, MultiTransmitter connects to a hu in the app y scanning a QR-code. When connecting wired devices, you don't need to know the resistors' resistance values. The system will also warn you if a device was not connected correctly. rSpecifications:Dimensions: 196238100mm.Weight: 805g.Numer of alarm tamper zones: 18.Supported detector contact types: NO, NC (without R), EOL (NC with R), EOL (NO with R).Alarm signals processing mode: pulsed or istale.Main power supply: 110-255 V, 5060 Hz.Backup power: 12 V DC.Detector power supply: 12 V DC, up to 1 A for all detector power supply outputs.Radio signal frequency and: 868.0-868.6 MHz or 868.7-869.2 MHz, depending on the sales region.Compatiility: operates with all Aja hus, and range etenders.Maimum radio signal power: up to 7.29 mW (25 mW limit).Radio signal range: up to 2000 m in the line of sight.Operating temperature range: from -10°C to +0°C.Operating humidity: up to 75%.rComplete set: MultiTransmitter oard.Body.Installation kit.Power cale.User Guide.rWarranty: 2 months. Batteries are not covered under warranty. |
