Close
(0) priekšmeti
You have no items in your shopping cart.
Visas kategorijas
    Filters
    Valoda
    Meklēt
    Ražotājs: NAVILOCK

    Navilock NL-8022MU USB 2.0 Multi GNSS Receiver u-blox 8 4.5 m


    €162,07 ar pvn

    Artikuls: ST06616706
    Preces kods: 62532
    Ražotāja mājaslapa
    *
    Noliktava Piegāde Daudzums Cena
    LV

    Specifikācija
    Īpašības USB
    Krāsa Balta
    Vada garums (m.) 4.0 m - 4.8 m
    Status7 dienas
    Description
    Description:
    The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The NL-8022MU GNSS receiver is especially designed for installation on a white ground (boat, camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.

    Specification:
    • Connector: USB 2.0 type A male
    • u-blox 8 UBX-M8030-KT chipset
    • Frequency:
    GPS: L1, 1575.4200 MHz
    GLONASS: L1, 1602.5625 ~ 1615.5000 MHz
    BEIDOU COMPASS: B1, 1561.0980 MHz
    GALILEO E1, 1575.4200 MHz
    QZSS L1, 1575.4200 MHz
    • Accepts the signals of up to 72 satellites at the same time
    • Supports AssistNow online/offline,
    SBAS (WAAS, EGNOS, QZSS and MSAS)
    • Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
    • Auto Baud Rate up to 115200 bps
    • Update rate:
    single GNSS: 18 Hz (e.g. GPS solo)
    multi GNSS: 10 Hz (e.g. GPS+GLONASS)
    • Sensibility max. –167 dBm
    • IPX7 protection class
    • LED-indicator for GPS-status
    • Operating temperature: -20 °C ~ +60 °C
    • Cold start in ca. 26 seconds
    • Hot start in ca. 1 second
    • Positioning accuracy: 2.5 m CEP (Circular Error Probable) and
    2 m CEP with SBAS
    • Cable length: ca. 4.5 m
    • Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm

    System requirements:
    • Windows Vista/7/8/8.1/10, Linux Kernel 2.6
    • PC or laptop with a free USB type A port

    Package content:
    • USB 2.0 receiver
    • Mounting material: stainless stell nut and washer
    • Driver CD
    • User manual on CD ROM

    Specifikācija
    Īpašības USB
    Krāsa Balta
    Vada garums (m.) 4.0 m - 4.8 m
    Status7 dienas
    Description
    Description:
    The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The NL-8022MU GNSS receiver is especially designed for installation on a white ground (boat, camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.

    Specification:
    • Connector: USB 2.0 type A male
    • u-blox 8 UBX-M8030-KT chipset
    • Frequency:
    GPS: L1, 1575.4200 MHz
    GLONASS: L1, 1602.5625 ~ 1615.5000 MHz
    BEIDOU COMPASS: B1, 1561.0980 MHz
    GALILEO E1, 1575.4200 MHz
    QZSS L1, 1575.4200 MHz
    • Accepts the signals of up to 72 satellites at the same time
    • Supports AssistNow online/offline,
    SBAS (WAAS, EGNOS, QZSS and MSAS)
    • Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
    • Auto Baud Rate up to 115200 bps
    • Update rate:
    single GNSS: 18 Hz (e.g. GPS solo)
    multi GNSS: 10 Hz (e.g. GPS+GLONASS)
    • Sensibility max. –167 dBm
    • IPX7 protection class
    • LED-indicator for GPS-status
    • Operating temperature: -20 °C ~ +60 °C
    • Cold start in ca. 26 seconds
    • Hot start in ca. 1 second
    • Positioning accuracy: 2.5 m CEP (Circular Error Probable) and
    2 m CEP with SBAS
    • Cable length: ca. 4.5 m
    • Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm

    System requirements:
    • Windows Vista/7/8/8.1/10, Linux Kernel 2.6
    • PC or laptop with a free USB type A port

    Package content:
    • USB 2.0 receiver
    • Mounting material: stainless stell nut and washer
    • Driver CD
    • User manual on CD ROM