Ubiquiti UniFi Outdoor AP Mesh Point, 2x2 MIMO, Dual Omni AntennaExtend on WiFi boundaries with a UniFi AP Mesh network. Merge multiple AP Mesh devices to create a wide-ranging Wide-Area WiFi network with multi-kilometer coverage. Can be installed anywhere thanks to its minimal size, which is measured only 3.5 dm in height.UniFi AC Mesh can be mounted on a pole wall or Ubiquiti High-gain antenna.• Mesh technology • Up to 183 meters range • Access point with Plug & Play • 802.11AC indoor / outdoor Wi-Fi • Dual-band omni-directional antennas • Dual-band speeds up to 1167 MbpsDimensions (WxDxH): 46 x 34 x 354 mmconnectivity Technology WirelessNumber of antennas 2Width 4.6 cmData Link Protocol IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11acData Transfer Rate 867 MbpsDepth 3.44 cmEnergy consumption during operation 8.5 wattsform factor Externalfrequency Band 2.4 GHz, 5 GHzfeatures VLAN support, wall mountable, Mesh network, Wi-Fi multimedia support, Quality of Service (QoS), 2T2R MIMO technology, pivotableInterface 1 x 1000Base-T (PoE +) - RJ-45Height 35.3 cmIncluded accessories PoE injector, pendulum mounting, mounting bracketsCapacity BSSID: By radio: 4Capacity Simultaneous units: 250+encryption Algorithm AES, TKIP, WPA, WPA2, WPA-PSK, WPA-Enterprise, WEPHumidity during operation 5 - 95% (non-condensing)Max range in open space 183 mMax temperature during operation 40 ° CMy operating temperature -30 ° CMains DC current 44 - 57 VDirection omnidirectionalRobust design Outdoors, indoorsStandards to be followed IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.11n, IEEE 802.11nStandards to be followed Plug and Play, IC, FCCSupport for PoE (Power Over Ethernet) PoE +Type of device Wireless access pointWeight 152 g |